introduction

As a highly efficient screening equipment, the vibrating screen is widely used in various industrial screening fields. Correct operation and maintenance can not only improve the working efficiency of the equipment, but also effectively extend its service life. This article will introduce it in detail from two aspects: operation and maintenance and solving common problems.

Operation and maintenance of rotary vibrating screen

1. Daily inspection : Before each use, the vibrating screen should be thoroughly inspected, including power connection, screen fastening and lubrication system, to ensure that the equipment is in good working condition.

2. Screen maintenance : The screen is a key component of the vibrating screen. It is very important to keep the screen clean and intact. The screen should be cleaned regularly to avoid clogging of materials and affecting screening efficiency.

3. Motor inspection : Check the operation of the motor regularly, pay attention to wear and heat, and clean and maintain it when necessary to avoid production stagnation caused by motor failure.

Common Problems and Solutions

1. Low screening efficiency : It may be caused by blockage of the screen, improper material properties or equipment failure. It is recommended to check the screen in time, clean the blockage, and consider adjusting the operating parameters.

2. Abnormal vibration : When abnormal vibration occurs, the equipment should be stopped immediately for inspection to check whether there are any loose or damaged parts, and repair them in time to avoid further damage.

3. Material leakage : If material leakage is found, check whether the sealing strip is intact. If necessary, replace the sealing strip to ensure that the material does not leak and improve the cleanliness of the working environment.

Summarize

Through proper operation and maintenance, the vibrating screen can play its maximum value in industrial applications. Regular inspection and maintenance can effectively reduce the failure rate, improve screening efficiency, and provide strong support for industrial production.