1. Conveyor belt slips

Conveyor belt slippage is one of the most common problems and is usually caused by insufficient belt tension. Solutions include:

• Adjust the tensioner to increase the belt tension
• Check the wear of the driving roller and the driven roller and replace them if necessary.
• Make sure the roller surface is clean and free of grease or other greasy substances.

2. Belt deviation

Belt deviation will affect the normal conveying of materials and may cause equipment damage. Common causes and solutions include:

• Check and adjust the position of the frame and rollers to maintain horizontal and vertical stability
• Check belt joints regularly to see if they are aligned and repair joint problems promptly
• Install an automatic deviation correction device where the belt deviates

3. Abnormal noise during operation

Abnormal noise is a common harbinger of failure during the operation of the belt conveyor. The main causes and treatment methods include:

• Lubricates the moving parts of bearings and rollers to reduce friction
• Check and tighten loose bolts and parts
• Check whether the material is stuck and clean up foreign matter in time

4. Belt breakage

A broken belt will cause the entire production line to stagnate. The main repair methods are:

• Check the belt quality and choose high-strength belt material
• Regularly check the strength and quality of belt joints and replace or repair them in time
• Avoid belt overloading and regularly check conveyor workload

Conclusion

Maintaining the normal operation of belt conveyors is essential to improving production efficiency and reducing downtime. By promptly discovering and resolving faults, you can ensure stable operation of the equipment and extend its service life.