How to choose a high-angle conveyor belt according to needs

In the production and transportation process, the selection of steep angle conveyor belts is crucial. The correct selection can not only improve production efficiency, but also effectively reduce operating costs. The following are several key factors to consider when selecting steep angle conveyor belts.

Material characteristics

First of all, material characteristics are important factors affecting the selection of conveyor belts. The particle size, humidity and friction coefficient of the material have a direct impact on the performance of the conveyor belt:

• Particle Size: Materials with larger particle sizes may require a more wear-resistant conveyor belt to reduce wear.
• Humidity: Materials with higher humidity may increase the sliding friction requirements of the conveyor belt, and it is necessary to choose a conveyor belt with good anti-slip properties.
• Friction coefficient: Materials with high friction coefficients require a conveyor belt with a relatively small friction coefficient to ensure smooth operation.

Transmission Angle

The transmission angle determines the design parameters of the belt conveyor. High-angle conveyor belts are usually used in situations where the transmission angle is large, so the strength and fixity of the conveyor belt need to be considered:

• The larger the transmission angle, the higher the strength requirement for the conveyor belt material.
• Specially designed side guards and support rods are required to ensure that materials do not slip when transported at a large angle.

Environmental conditions

Environmental conditions such as temperature, humidity and chemical aggressiveness also need to be considered:

• Temperature: The conveyor belt needs to operate normally within the temperature range of the environment. When selecting, high or low temperature resistance should be considered.
• Humidity: A high humidity environment may cause corrosion to the conveyor belt, so it is necessary to choose anti-corrosion materials.
• Chemical corrosion: When transporting corrosive materials, it is necessary to choose a conveyor belt with strong corrosion resistance.

Conveyor belt material

Finally, the material of the conveyor belt is an important factor to ensure its long-term stable operation. The conveyor belt material should have the following characteristics:

• Wear resistance: In long-term high-intensity working environment, the conveyor belt needs to have high wear resistance.
• Temperature resistance: For high or low temperature materials, the conveyor belt material with good temperature resistance must be selected.
• Corrosion resistance: When conveying corrosive materials, it is very important to choose a conveyor belt with strong corrosion resistance.

In summary, choosing a suitable high-angle conveyor belt based on material characteristics, transmission angle, environmental conditions and conveyor belt material can effectively improve the efficiency and reliability of the production line. I hope this article can provide you with valuable reference when choosing a high-angle conveyor belt.